Fortinet 3.0 MR7 manual Configuring report schedules, To edit text, To edit section, 119

Reports Configuring reports

Group	Enter a group’s name that you
	want to use in the report. You
	can enter multiple names in the
	field, using commas to separate
	the group names.
LDAP Query	Select the LDAP Query check
	box and then select the LDAP
	directory or Windows Active
	Directory group from the drop-
	down list.
	This is useful if you want to
	restrict report scope using a list
	of user names from the LDAP
	directory or Windows Active
	Directory group, instead of a
	group name configured on a
	device.

3Select OK.

If you want to rearrange the charts so that they are presented in a different order, select and drag a chart (using your mouse) to above or below another chart. The order is reflected in the generated report.

To edit text

1Select Edit beside the text name.

2Clear the appropriate information that appears in the Message field.

3Enter the new information in the Message field.

4Select OK.

To edit section

1Select Edit beside the section name.

2Clear the appropriate information that appears in either Title or Description fields, or both fields.

3Enter the new information in either Title or Description fields, or both fields.

4Select OK.

Configuring report schedules

Report schedules are configured after you have configured report layouts. If you do not have a report layout, you cannot configure a report schedule.

When configuring report schedules, you can specify the variables selected for charts. Variables are only specified in report schedules.

Report schedules provide a way to schedule a daily, monthly or weekly report so that the report will generate at a specific time period. You can configure multiple report schedules in Report > Schedule.

Figure 3: Report schedules

FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908	119