System

Admin

RADIUS Server

RADIUS servers authenticate administrators. The following procedure explains how to add a RADIUS server for authenticating administrators.

To add a RADIUS server

1Go to System > Admin > RADIUS Server.

2Select Create New.

3Configure the following and select OK:

Name

Enter a name to identify the server.

Server IP/Name

Enter the IP address for the server.

Shared Secret

Enter the password for the server.

Authentication

Select which protocol the FortiAnalyzer unit will use to

Protocol

communicate with the RADIUS server.

Administrator Settings

Administrators Settings enables you to configure some common settings for all administrator accounts, including the idle timeout (how much time must pass without activity before the FortiAnalyzer unit logs out an administrator), the language for the web-based manager, and the PIN for the LCD panel. You can also enable or disable administrative domains (ADOMs).

To configure administrators, go to System > Admin.

Note: Only the admin administrator can add or change administrator account information.

Figure 25: Administrators Settings

Idle Timeout

Set the idle timeout to control the amount of inactive time before

 

the administrator must log in again. To improve security keep the

 

idle timeout to a low value (for example, five minutes).

 

Note that sessions will not time out when viewing real-time logs.

Web Administration

Set the language for the web-based manager.

Language

 

FortiAnalyzer Version 3.0 MR7 Administration Guide

 

05-30007-0082-20080908

51

Page 51
Image 51
Fortinet 3.0 MR7 manual Administrator Settings, To add a Radius server Go to System Admin Radius Server