Fortinet 3.0 MR7 manual Filtering session information, Report Engine

Dashboard System

To view the session information

1Go to System > Dashboard.

2In the Statistics area, next to Connections, select Details.

Resolve Host Name	Select to display host names by a recognizable name rather than
	IP addresses. For more information about on configuring IP
	address host names see “Configuring IP aliases” on page 60.
Resolve Service	Select to display network service names rather than port numbers,
	such as HTTP rather than port 80.
Refresh Time	Select the frequency of the refresh of the Connections page to
	view the connection activity.
Stop Refresh	When the refresh is started, select to stop the refreshing of the
	connections page. To re-start the refresh, select Start Refresh.
Start Refresh	When the refresh is stopped, select to start the refreshing of the
	connections page. To stop the refresh, select Stop Refresh.

View n per page Page n of n Search

Select the number of rows to display per page.

Enter a page number, then press Enter to go to the page.

Enter a keyword to perform a simple search on the session information available. Select Go to begin the search. The number of matches appears above the Search field.

Protocol	The service protocol of the connection, such as UDP or TCP.
From IP	The source IP address of the connection.
From Port	The source port of the connection.
To IP	The destination IP address of the connection.
To Port	The destination port of the connection.
Expires (Secs)	The time in seconds remaining before the connection terminates.

Filtering session information

You can filter the contents to find specific content. Each column of data includes a gray filter icon. Select the icon to filter the contents of the column.

When applying a column filter, the filter icon appears green.

To turn off the filter, select the filter icon for the column, and select Clear all Filters.

Report Engine

The Report Engine display shows the FortiAnalyzer report generation activity. The report engine activity information includes whether the report engine is active or inactive, what reports are running when active and the percentage completed.

Select the Generate report button to create a new report profile.

Figure 12: Report Engine

	FortiAnalyzer Version 3.0 MR7 Administration Guide
36	05-30007-0082-20080908