Fortinet 3.0 MR7 FortiAnalyzer unit log settings Log Locally, Log Level Allocated Disk Space MB

System Config

Figure 30: FortiAnalyzer unit log settings

Log Locally	Select to save the FortiAnalyzer log messages on the FortiAnalyzer
	hard disk.

Log Level

Allocated Disk Space (MB)

Select the severity level for the log messages recorded to the FortiAnalyzer hard disk. The FortiAnalyzer unit logs all levels of severity down to, but not less severe than, the level you select. For example, if you want to record emergency, critical, and error messages, select Error.

The maximum size of the FortiAnalyzer log file that the FortiAnalyzer unit saves to the hard disk.

When the log file reaches the specified maximum size, the FortiAnalyzer unit saves current network traffic log file with an incremental number and starts a new active log file.

Log options when log disk is full

Use System Device Log Settings

Log file should not exceed

The policy to follow for saving the current log and starting a new active log when the FortiAnalyzer disk is full.

Select Overwrite Oldest Files to delete the oldest log entry when the disk is full.

Select Stop Logging to stop logging messages when the disk is full.

Enable to use the same settings for local FortiAnalyzer logs as device logs. For information about device log settings, see “Rolling and uploading logs” on page 104.

Enter the maximum size of the current log file that the FortiAnalyzer unit will save to the hard disk. When the log file reaches the specified maximum size, the FortiAnalyzer unit saves the current log file and starts a new active log file.

When a log file reaches its maximum size, the FortiAnalyzer unit saves the log files with an incremental number, and starts a new log file with the same name.

This option appears only when Use System Device Log Settings is disabled.

FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908	57