Fortinet 3.0 MR7 manual 10.10.1.108889

Maintenance System

Figure 36: FortiGuard Center

FortiGuard

Subscription

Services

Manual Update

Remote

Vulnerability

Scan (RVS)

The RVS (remote vulnerability scan) engine and module version number, date of last update, and status of the connection to the Fortinet Distribution Network (FDN).

A green indicator means that the FortiAnalyzer unit can connect to the FDN or override server.

A grey indicator means that the FortiAnalyzer unit cannot connect to the FDN or override server. Check the configuration of the FortiAnalyzer unit and any NAT or firewall devices that exist between the FortiAnalyzer unit and the FDN or override server. For example, you may need to add routes to the FortiAnalyzer unit’s routing table.

Select to upload an RVS upgrade file from your management computer. To obtain an RVS upgrade file, contact Fortinet Technical Support.

You might upload an RVS file if you want to provide an immediate update, or use an RVS version other than the one currently provided by the FDN. If you want to use an RVS file other than the one currently provided by the FDN, also disable scheduled updates.

Note: Manual updates are not a substitute for a connection to the FDN. Like scheduled updates, manual updates require that the FortiAnalyzer unit be able to connect to the FDN to validate its RVS license.

Select the blue arrow to expand this FortiAnalyzer unit’s FortiGuard RVS subscription service options.

Use override Enable Use override server address and enter the IP address and port server address number of an FDS in the format <IP>:<port>, such as

10.10.1.10:8889.

If you want to connect to a specific FDN server other than the one to which the FortiAnalyzer unit would normally connect, you can override the default IP addresses by configuring an override server.

If, after applying the override server address, the FDN status icon changes to indicate availability (a green check mark), the FortiAnalyzer unit has successfully connected to the override server. If the icon still indicates that the FDN is not available, the FortiAnalyzer unit cannot connect to the override server. Check the FortiAnalyzer configuration and the network configuration to make sure you can connect to the FDN override server from the FortiAnalyzer unit.

Use Web Proxy Select to enable the FortiAnalyzer unit to connect to the FDN through a web proxy, then enter the IP, Port, and (if required) Name and Password.

IP Enter the IP address of the web proxy.

FortiAnalyzer Version 3.0 MR7 Administration Guide

72 05-30007-0082-20080908