Device

Configuring unregistered device connection attempt handling

Figure 2: Unregistered Device Options

To configure device connection attempt handling

1Go to Device > All > Device.

2Select Unregistered Devices Options.

3Select from the following options for known device types:

Ignore connection and log data

Allow connection, add to unregistered table, but ignore log data

Allow connection, register automatically, and store up to N MB data

Do not accept connection attempts, and do not add devices to the device list.

Add the device to the unregistered device list for future configuration and addition to the FortiAnalyzer unit, but do not save the incoming log messages to the hard disk.

Add the device to the registered device list for future configuration and addition to the FortiAnalyzer unit, and save the log messages to the hard disk, but only up to N MB disk space.

or the following options for unknown device types:

Ignore all unknown unregistered Do not accept any unknown, unregistered incoming

devicesdevice requests, and do not add them to the unregistered device list.

Add unknown unregistered device to unregistered table, but ignore data

Add unknown unregistered devices to unregistered table, and store up to N MB data

Add the device to the unregistered device list for future configuration and addition to the FortiAnalyzer unit, but do not save the incoming log messages to the hard disk.

Add the device to the unregistered device list for future configuration and addition to the FortiAnalyzer unit, and save the log messages to the hard disk, but only up to N MB disk space. Logs cannot be displayed until you add the device to the device list.

4Select OK.

FortiAnalyzer Version 3.0 MR7 Administration Guide

 

05-30007-0082-20080908

79

Page 81
Image 81
Fortinet 3.0 MR7 manual Or the following options for unknown device types, Unregistered Device Options