Configuring reports

Reports

E-Mail Destination The route the email will take when sent, in the format, <recipient_email address> (from <sender_email address> through <email server>).

FTP/SFTP/SCP Server

IP

Action

The type of server that the report will be uploaded to in the format, <ipv4>(typeofserver). For example, 10.10.20.15(FTP).

Select Edit to view or modify the report output.

Select Delete to remove the report output.

When configuring the FortiAnalyzer unit to email a report, you must first configure the FortiAnalyzer unit to connect to an email server. For more information, see “Configuring alerts by email server” on page 135.

If HTML reports are sent to a user that has an email client without supported HTML, the HTML code for the reports will display in the message body.

You cannot delete a report output configuration if it is already being used in another report.

Figure 7: Output template

To configure the output for a report

1Go to Report > Config > Output.

2Select Create New.

3Enter and/or select the appropriate information for the fields and check boxes for the following:

Name

Enter a name for the report. This name only concerns the report

 

output configuration that you are configuring for your report., not

 

the report itself.

Description

Enter a description for the report. This is optional.

 

FortiAnalyzer Version 3.0 MR7 Administration Guide

126

05-30007-0082-20080908

Page 130
Image 130
Fortinet 3.0 MR7 manual FTP/SFTP/SCP Server Action, Output template