Fortinet 3.0 MR7 manual FortiGuard Center

System Maintenance

Encrypt configuration	Select to encrypt the backup file. Enter a password in the
file	Password field and enter it again in the Confirm field. You
	will need this password to restore the file.
	You must encrypt the backup file if you are using a
	secure connection to a FortiGate or FortiManager device.
Backup	Select to back up the configuration.
Restore	Restore the configuration from a file.
Restore configuration	Currently the only option is to restore from a PC.
from:
Filename	Enter the configuration file name or use the Browse
	button if you are restoring the configuration from a file on
	the management. computer.
Password	Enter the password if the backup file is encrypted.
Restore	Select to restore the configuration from the selected file.
Firmware
Partition	A partition can contain one version of the firmware and
	the system configuration.
Active	A green check mark indicates which partition contains the
	firmware and configuration currently in use.
Last Upgrade	The date and time of the last update to this partition.
Firmware Version	The version and build number of the FortiAnalyzer
	firmware. On the backup partition, you can:
	• Select Upload to replace with firmware from the
	management computer.
	• Select Upload and Reboot to replace the firmware.

FortiGuard Center

You can update the engine and vulnerability scan modules in one of the following ways:

•manually upload update packages to the FortiAnalyzer unit from your management computer

•configure the FortiAnalyzer unit to periodically request updates from the Fortinet Distribution Network (FDN)

You must first register the FortiAnalyzer unit with the Fortinet Technical Support web site, https://support.fortinet.com/ to receive RVS updates from the FDN. The FortiAnalyzer unit must also have a valid Fortinet Technical Support contract, which includes RVS update subscriptions, and be able to connect to the FDN or the IP address that you have configured to override the default FDN addresses. For port numbers required for license validation and update connections, see the Fortinet Knowledge Center article FDN Services and Ports.

For more information about configuring vulnerability scan jobs and viewing vulnerability scan reports, see “Tools” on page 157.

To manually upload RVS updates or to configure scheduled RVS updates, go to System > Maintenance > FortiGuard Center.

FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908	71