Fortinet 3.0 MR7 manual Admin, Adding a route, To add a static route Go to System Network Routing

System Admin

Adding a route

Static routes provide the FortiAnalyzer unit with the information it needs to forward a packet to a particular destination other than the default gateway.

To add a static route

1Go to System > Network > Routing.

2Select Create New.

3Configure the following options:

Destination IP	Enter the destination IP address network mask of packets that the
	FortiAnalyzer unit has to intercept.
Mask	Enter a netmask to associate with the IP address.
Gateway	Enter the IP address of the gateway where the FortiAnalyzer unit
	will forward intercepted packets.
Interface	Select a port from the list of available ports.

4Select OK.

Admin

Use the Admin option to configure and maintain FortiAnalyzer administrators, administrative domains (ADOMs), set a user’s administrative access and maintain passwords.

When the FortiAnalyzer unit is initially installed, it is configured with a single master administrator account with the user name of “admin”. From this account, you can add and edit administrator accounts, control the access level of each administrator account and control the IP address for connecting to the FortiAnalyzer unit. This account is permanent, and cannot be deleted from the FortiAnalyzer unit.

When configuring administrators, you can add ‘@’ symbol in the name. For example, admin_1@headquarters, to identify an administrator that will access the FortiAnalyzer unit from the headquarters office of their organization.

To view a list of administrators for the FortiAnalyzer unit, go to System > Admin > Administrators.

Figure 23: Administrator account list

Delete

Edit

Change Password

FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908	47