Fortinet 3.0 MR7 manual System Information, Rebuilding icon

System Dashboard

Figure 4: RAID Monitor displaying a disk that is being rebuilt

Rebuilding icon

Rebuild

Status bar

Array Status

Disk space usage Used/Free/Total

Rebuild Status progress bar

Estimated rebuild time

[start and end time] (For software RAID only)

Rebuild Warning

Displays the following icons and status text when the RAID disk is okay, failed or being rebuilt:

•green checkmark (OK) – indicates that the RAID disk has no problems

•warning symbol (Warning) – indicates that there is a problem with the RAID disk, such as a failure, and needs replacing. The RAID disk is also in reduced reliability mode when this status is indicated in the widget.

•wrench symbol (Rebuilding) – indicates that a drive has been replaced and the RAID array is being rebuilt; it is also in reduced reliability mode

•exclamation point (Failure) – indicates that multiple drives have failed and the RAID array is corrupted and that the drive must be reinitialized

Displays the amount of disk used in both percentage and a fill line.

Displays the amount of used disk space, available or free disk space, and the total available disk space. These numbers are displayed in GB.

A bar indicating the progress of the rebuilding of a RAID array. This bar displays the progress in percent. This bar displays only when a RAID array is being rebuilt.

The time period of when the rebuild will be complete. The time is displayed by the number of hours, minutes and seconds. The time period also indicates when the rebuilding process will end, displaying the name of the day, and the time in 12-hour format, for example, Friday at 3:14 pm.

This time period displays only when an array is being rebuilt. This time period will not display in hardware RAID, such as FortiAnalyzer-2000/2000A, and FortiAnalyzer-4000/4000A.

A bar and text reminding you the system has no redundancy protection until the rebuilding process is complete. This text displays only when an array is being rebuilt.

System Information

The System Information area of the Dashboard displays basic information about the FortiAnalyzer unit, such as up time and firmware version.

FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908	29