Foundry Networks LS 624, LS 648 manual 4 Status LEDs, Condition, System LEDs

Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide

Figure 2.9 System LEDs

System Status LEDs

Fastlron LS 624

FLS 624

		Table 2.4: Status LEDs
LED	Condition	Status
Power	Green	Internal power is operating normally.
	Amber	Internal power supply failure.
	Off	Power off or failure.
Diag	Green	System self-diagnostic test successfully completed.
	Amber	System self-diagnostic test has detected a fault.
RPS	Green	Redundant power supply is providing power.
	Amber	Primary power supply is active, RPS is on standby.
	Off	Redundant power supply is off or not plugged in.
Stack Master1	Green	Switch is the Master unit of the stack. State may include topology
		discovery, IP assignment, or normal operations.
	Flashing Green	Switch is the Master unit of the stack, system is initializing.
	Amber	Switch is operating as a Slave unit in the stack.
	Flashing Amber	System in Master arbitration/election state.
	Off	System in standalone mode.
Stack Link1	Green	Uplink and downlink operating normally.
	Flashing Green	Uplink has failed.
	Flashing Amber	Downlink has failed.
	Off	No stacking link present.
Module	Green	An expansion module is installed and operating normally.
	Amber	An expansion module is installed but has failed.
	Off	There is no module installed.
Stack ID1	1-8	Indicates the switch stack ID.
		The Master unit is numbered 1. (Note that If the master unit fails
		and a backup unit takes over, the stack IDs do not change.)
		Slave units are numbered 2-8.
	0	In standalone mode.

2 - 6 © 2007 Foundry Networks, Inc. September 2007