Foundry Networks LS 648 Input Connector, Electromagnetic Compatibility EMC and Immunity Standards

Hardware Specifications

Input Connector

	Table 0.15: Input Connector for Power Supplies
Power Supply	Input Connector Properties
RPS2-EIF	IEC socket 216C743-07)
	C14 type: UL File No.: E29179,
	CSA File No.: LR19980

Regulatory Compliance

This section contains regulatory standards for the power supplies, including the following:

•Electromagnetic Compatibility (EMC) compliance

•Immunity regulations

•Safety certifications

•Safety warning labels

•Environmental standards

Electromagnetic Compatibility (EMC) and Immunity Standards

The power supplies comply with the conducted and radiated test and immunity standards as listed in Table 0.16. EMC standards are within a 6 dB minimum margin.

Table 0.16: EMC and Immunity Standards for Power Supplies

Power Supply	EMC Standards		Immunity Standards
RPS2-EIF	•	ICES-003, Electromagnetic Emission	• EN 61000-6-1, Electromagnetic
	• FCC Part 15 Class A		Compatibility, Generic Standard
	• EN 55022/CISPR 22 Class A		• EN 55024, Information Technology
			equipment - Immunity Characteristics
	•	VCCI Class A
	• EN 61000-3-2, Power Line Harmonics
	• EN 61000-3-3, Voltage Fluctuation &
		Flicker
	•	EN 61000-6-3, Electromagnetic
		Compatibility, Generic Standard
	• AS/NZS CISPR 22, Electromagnetic
		Compatibility
	• Harmonic Current Emissions (Class A) -
		EN61000-3-2, with Amendment 14 (1999)

FCC CFR 47 Part 15 Warning:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

September 2007 © 2007 Foundry Networks, Inc. 2 - 11