Foundry Networks LS 648, LS 624 manual FLS units

Installing a FastIron LS Switch

5.Check the LEDs on the RPS to ensure proper operation. On the RPS2-EIF, the Power LED should light up. If the LEDs indicate otherwise, see "“Troubleshooting” on page 1-1for more information.

	FLS units
RPS input port
	RPS Unit
	RPS output port
AC Power	AC Power
Supply No.1	Supply No.2

NOTE: For International use, you may need to change the AC line cord. You must use a line cord set that has been approved for the receptacle type in your country.

September 2007 © 2007 Foundry Networks, Inc. 3 - 13