Foundry Networks LS 624 Control Features, Serial Management Interface Console Port, Reset Button

Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide

The following figures show the front panels of these FastIron LS models.

Figure 2.1 FastIron LS 624

Fastlron LS 624

FLS 624

Figure 2.2 FastIron LS 648

Fastlron LS 648

FLS 648

45 46 47 48

Figure 2.3 FastIron LS 624 and 648 rear panel

RPS DC In 12V 13A

100-240V~

50-60Hz 2A

Figure 2.4 FastIron LS 624 with module installed

Fastlron LS 624

FLS 624

Figure 2.5 FastIron LS 624 and 648 rear panel with modules Installed

RPS DC In 12V 13A

100-240V~

50-60Hz 2A

Control Features

Each device’s front panel includes the following control features:

•Serial management interface (the port labeled Console)

•Reset button

Serial Management Interface (Console Port)

The serial management interface enables you to configure and manage the device using a third-party terminal emulation application on a directly connected PC. A straight-through EIA/TIA DB-9 serial cable (M/F) ships with the device. The serial management interface (the Console port) is located in the right corner of the front panel.

Reset Button

The reset button allows you to restart the system without removing power or using the CLI or Web management interface. The button is located to the left of the serial management interface and is recessed to prevent it from being pushed accidentally.

FastIron LS Network Interfaces

The FLS624 and FLS648 provide the following interfaces:

•10/100/1000 ports with RJ-45 copper connectors

2 - 2 © 2007 Foundry Networks, Inc. September 2007