EN

1

Freecom MusicPal

Chapter 1: Connecting / Installing the Freecom MusicPal

1.1 Hardware (LAN)

Installation of the Freecom MusicPal proceeds according to the following steps:

1.Connect the power pack to your Freecom MusicPal and plug into a power socket.

2.Take the enclosed Ethernet cable and use it to connect the LAN port on the back of the Freecom MusicPal with the LAN port of your media server (UPnP) or router/switch.

3.Set your router to DHCP in the IP configuration. For more details, refer to the Appendix in this manual.

4.Check the LINK/ACT light of the Freecom MusicPal LAN port. If it is illuminated, the Freecom MusicPal is correctly connected.

5.Select Internet Radio from the main menu of your Freecom MusicPal.

10

Page 10
Image 10
Freecom Technologies user manual Connecting / Installing the Freecom MusicPal, Hardware LAN