7.Let the filter run 10 to 12 seconds after oil/shortening stops coming out of the Power Shower to clear the lines and prevent shortening from hardening in them. Rotate the oil return handle to the OFF position to stop the pump. Remove the Power Shower and allow it to drain. Turn the fryer on and allow the cooking oil/shortening to reach setpoint.
DANGER
The crumb tray in fryers equipped with a filter system must be emptied into a fireproof container at the end of frying operations each day. Some food particles can spontaneously combust if left soaking in certain shortening material.
WARNING
The filter pump is equipped with a manual reset switch in case the filter motor overheats or an electrical fault occurs. If this switch trips, turn off power to the filter system and allow the pump motor to cool 20 minutes before attempting to reset the switch.
The switch is accessed by pulling the filter assembly out of the fryer cabinet so that the motor can be reached. The switch is the red button on the face of the motor (see photo below).
