Frymaster FBR18 Series manual Operating Instructions, 3.1Introduction, Frymaster

FBR18 & FBRA18 SERIES GAS RETHERMALIZERS

CHAPTER 3: OPERATING INSTRUCTIONS

3.1Introduction

Mechanically, the FBR18 and FBRA18 rethermalizers are virtually identical, the only difference being that the FBRA18 units have an automatic filling (AutoFill) feature. Both units use the same digital temperature controller and mechanical timers.

In operation, a setpoint is programmed into the controller which then regulates burner firing to maintain the water in the cookpot at the desired temperature. Six individual color-coded mechani- cal timers allow different types or quantities of product to be rethermalized simultaneously. The timers are equipped with an alarm to notify the operator that rethermalizing is complete. The prod- uct baskets have color-coded handles that correspond to the timers to eliminate confusion.

3.2FBR18/FBRA18 Digital Controller

				Celsius or
Power	Digital			Fahrenheit
Switch	Display			Display Switch
	9 . 9	9	9	C
Frymaster
Temperature	Setpoint			Melt	Heating
or Setpoint	Adjustment			Cycle	Mode
Display Switch	Arrows			Switch	Indicator

OPERATING THE FBR18/FBRA18 DIGITAL CONTROLLER

WARNING

Ensure the cookpot is filled with water before turning the controller on. “Dry firing” will cause damage to the cookpot!

1.Turn the controller on by pressing the Power switch. The controller software version num- ber will display for 4 seconds in the digital display then change to the last programmed setpoint temperature.

3-1