WATER NOT HEATING.
AUTOFILL (IF INSTALLED)
WORKED PROPERLY.
Press the Temperature Check button twice to display setpoint.
Has the correct setpoint | No |
been programmed? |
|
Yes |
|
Did burners | No |
light? |
|
Yes |
|
Did water reach | No | |
setpoint temperature? | ||
| ||
Yes |
|
Problem resolved.
Program setpoint in
accordance with instructions
in Chapter 3.
Refer to troubleshooting guide "BURNERS DO NOT LIGHT".
Insert a good grade thermometer into
cookpot with tip near temperature probe and wait two minutes. Press the Temperature Check button once to display cookpot temperature.
Is temperature |
| There is a problem in | |
displayed reasonably | No | ||
temperature probe | |||
close to thermometer |
| ||
| circuit. Call FASC. | ||
reading? |
| ||
|
| ||
Yes |
|
| |
Temperature control |
|
| |
features are working properly. |
|
| |
If water still fails to reach |
|
| |
setpoint, call FASC. |
|
|
