Non-CE Standard

for Incoming Gas Pressures

Gas

Minimum

Maximum

 

6" W.C.

14" W.C.

Natural

1.49 kPa

3.48 kPa

 

14.93 mbar

34.84 mbar

 

11" W.C.

14" W.C.

LP

2.74 kPa

3.48 kPa

 

27.37 mbar

34.84 mbar

 

 

 

 

 

 

7.For fryers equipped with a FootPrint Pro system (BIPH55 models) plug the electrical cord(s) into a power receptacle behind the fryer.

2.4Connection to Gas Line

DANGER

Before connecting new pipe to this appliance, the pipe must be blown out thor- oughly to remove all foreign material. Foreign material in the burner and gas con- trols will cause improper and dangerous operation.

DANGER

When pressure-testing incoming gas supply lines, disconnect the fryer from the gas line if the test pressure will be ½ PSIG (3.45 kPa, 13.84 inches W.C.) or greater to avoid damage to the fryer’s gas tubes and gas valve(s).

DANGER

All connections must be sealed with a joint compound suitable for the gas being used and all connections must be tested with a solution of soapy water before light- ing any pilots.

Never use matches, candles, or any other ignition source to check for leaks. If gas odors are detected, shut off the gas supply to the appliance at the main shut-off valve and immediately contact the local gas company or an authorized service agency for service.

DANGER

“Dry-firing” your unit will cause damage to the frypot and can cause a fire. Always ensure that melted shortening, cooking oil, or water is in the frypot before firing the unit.

The size of the gas line used for installation is very important. If the line is too small, the gas pressure at the burner manifold will be low. This may cause slow recovery and delayed ignition. The incoming gas supply line should be a minimum of 1½” (38 mm) in diameter. Refer to the chart on the following page for the minimum sizes of connection piping.

2-5

Page 14 Page 16
Page 15
Image 15
Frymaster BIPH55, MPH55 warranty Non-CE Standard For Incoming Gas Pressures
Page 14 Page 16

BIPH55, MPH55 specifications

The Frymaster BIPH55 and MPH55 are cutting-edge fryers designed to meet the needs of modern commercial kitchens. Renowned for their efficiency and reliability, these fryers are perfect for establishments looking to optimize their frying processes, ensuring that food is cooked to perfection while minimizing oil use and maximizing output.

One of the main features of the Frymaster BIPH55 and MPH55 is their innovative oil filtration system. This technology allows for continuous oil filtration during operation, which not only enhances the lifespan of the oil but also maintains food quality. The built-in filtration system reduces the need for manual oil changes, saving both labor and costs while delivering crispier, more delicious fried products.

Additionally, the BIPH55 model is designed with a high-efficiency burner system that reduces energy consumption, making it an eco-friendly choice. This system increases cooking speeds and provides precise temperature control, which is critical for achieving consistent results. The adjustable temperature settings allow chefs to customize their frying processes to suit various types of cuisine, from crispy French fries to succulent chicken wings.

Another standout characteristic of these fryers is their digital control interface. The user-friendly display allows operators to monitor cooking times and temperatures easily, reducing the risk of human error. Programmable controls can store up to 12 menu items, allowing for quick access to settings tailored for specific recipes, thus enhancing efficiency during peak hours.

The durable construction of the Frymaster BIPH55 and MPH55 ensures a long lifespan, even in the busiest kitchens. The stainless steel body is easy to clean and resistant to corrosion, which is essential for maintaining hygiene standards. The fry baskets are designed to be lightweight yet robust, allowing for easy handling while ensuring that food items can be submerged without difficulty.

Safety features are also a priority in these models, with automatic shut-off mechanisms that prevent overheating and ensure safe operation. The design includes a large oil capacity, which is ideal for high-volume frying operations, allowing establishments to serve their customers promptly without sacrificing quality.

In conclusion, the Frymaster BIPH55 and MPH55 are superb additions to any commercial kitchen looking to enhance their frying capabilities. With a combination of advanced technologies, robust construction, user-friendly controls, and energy efficiency, these fryers represent an investment in quality cooking and operational excellence. Whether for a fast-food outlet, restaurant, or catering service, the BIPH55 and MPH55 are poised to elevate the frying experience.
Top Page Image Contents