Blower
Wiring connection assembly mounting nuts
Figure 1
2.Remove the three fasteners that secure the blower motor assembly to the blower housing, and separate the two components. (See Figure 2)
Remove these fasteners. |
Figure 2
3.Wrap the motor with plastic wrap to prevent water from entering it. Spray degreaser or detergent on the blower wheel and the blower housing. Allow it to soak for five minutes. Rinse the wheel and housing with hot tap water, then dry with a clean cloth. (See Figure 3)
Wrap the motor and wires |
with plastic wrap or a |
plastic bag. |
Blower Housing |
Blower Wheel |
Figure 3
