YSCFC24 SERIES FLATBOTTOM GAS FRYERS
CHAPTER 7: TROUBLESHOOTING
FACTORY APPROVAL MUST BE OBTAINED PRIOR TO ANY WARRANTY WORK BEING
DONE OR FRYMASTER CANNOT BE HELD RESPONSIBLE.
The following procedures must be performed by Factory Authorized Service Technicians, and are provided as an aid to expedite troubleshooting and repair of YSCFC24 Series frying systems.
7.1 PILOT BURNER MALFUNCTIONS
PROBLEM | CORRECTIVE ACTION |
Pilot will not ignite; no | Ensure the combination gas valve is in PILOT position and that |
evidence of gas at pilot | gas is available at the control valve (check |
burner. | and/or |
|
|
Pilot burner ignites but will | Pilot flame may be adjusted incorrectly. Adjust flame to 1½" |
not remain lit when gas | high by turning pilot flow adjustment screw. |
knob is released. |
|
|
|
Pilot burner ignites | 1. Pilot flame may be adjusted too low, even though it |
properly and burns | appears to be satisfactory. |
properly, but goes out | earlier. |
| |
when the exhaust blower | 2. Pilot flame may be adjusted too high and is on the verge |
comes on. | of blowing out. |
|
|