Fujitsu 600C manual I Bit per pixel Byte 1A, n RIF reverse image format Byte 1D, bit

Sense key: X'5' (ILLEGAL REQUEST)

(I)Bit per pixel: Byte 1A

Specifies the number of bits per pixel. This value shall be X'Ol', X'04' and X'08' for this scanner. For an:

value, this scanner returns the following error:

∙Status: B'00001' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

(m) Halftone pattern: Bytes lB to 1C (lB reserved)

Specifies the dithered pattern used in binarizing multibit multivalued image data. This scanner validates

this field only with the selection of dither/half-tone monochrome or mixed mode processing. For other

selections, this field is ignored. The values are specified in the following format:

∙Byte IB: Reserved

∙Byte IC

7 6 5 4 3 2 1 0

Half-tone pattern number

this bit is reserved

This scanner has four types (X'00' to X'03') of built-in pattern. If a value greater than the four range is specified, this scanner returns the following error:

∙Status: B'00001' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

(n)RIF (reverse image format): Byte 1D, bit 7

This scanner does not support RIF. If a value other than X'O' is specified, this scanner returns the following errors:

∙Status: B'00001' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

(o)Padding type: Byte 1D, bits 0 to 2

This scanner does not support Padding type. If a value other than X'000' is specified, this scanner returns

the following error:

∙Status: B'0000l' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

(p)Bit ordering: Bytes 1E to 1F

4-38