Fujitsu 600C manual Acknowledgment, b Unload object, c Load object, d Count Bytes 2 to, a Normal

∙Status: B'00001' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

(b)Unload object

This scanner unloads the documents from the ADF. If the ADF does not contain a document when this command is received, this scanner does not generate an error but returns the GOOD status.

The unload object function is not vital to the scanner. After completion of reading with the READ command, the scanner automatically unloads the documents.

(c)Load object

This scanner loads the document from the ADF paper chute. If a document is already loaded in the ADF when this command is received, this scanner does not generate an error but returns the GOOD status.

(d)Count: Bytes 2 to 4

This scanner does not support this field. If a value other than 0 is specified, this scanner returns the following error:

∙Status: B'00001' (CHECK CONDITION)

∙Sense key: X'5' (ILLEGAL REQUEST)

4.4.8.2Acknowledgment

This scanner reports the acknowledgment of the OBJECT POSITION command as follows:

(a)Normal

The GOOD status is returned. Status: B'00000' (GOOD) Sense key: X'0' (NO SENSE)

(b)Abnormal

The CHECK CONDITION status is returned and sense data is created. Status: B'00001' (CHECK CONDITION)

Send key: X'3' (MEDIUM ERROR)

(The cause of the error is jammed paper, an open ADF cover, or an empty paper supply.)

4-45