operation(s) in progress. When you resume operation from Standby mode, your notebook will return to the point where it left off. To resume operation, you must use the Suspend/Resume button to resume operation, and there must be an adequate power source available,
or your notebook will not resume.
If you are running your LifeBook notebook on battery power, be aware that the battery continues to discharge while your notebook is in Standby mode, though not as fast as when fully operational.
■The Standby or Hibernate modes should not be used with certain PC Cards. Check your PC Card documentation for more information.
■When PC Cards or external devices are in use, Hibernate mode cannot return to the exact state prior to suspension, because all of the peripheral devices will be
HIBERNATION (SAVE-TO-DISK) FEATURE
The Hibernation feature saves the contents of your notebook’s system memory to the hard drive. You can enable or disable this feature as follows.
Enable or Disable the Hibernation Feature
Windows Vista:
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1.From the Start menu, select Control Panel, then select Power Options (if you are in Control Panel Home view, you’ll need to click Mobile PC before clicking Power Options).
2.Select “Choose what the power button does” or “Choose what closing the lid does”, then make your selections (Do Nothing, Sleep, Hibernate, or Shut Down).
Windows XP:
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1.From the Start menu, select Settings, and then select Control Panel.
2.From the Control Panel select Power Options.
3.Select the Hibernate tab. Select the box to enable or disable this feature.
WINDOWS POWER MANAGEMENT
The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the
G e t t i n g S t a r t e d
Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters.
RESTARTING THE SYSTEM
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows Vista
1.Click the Start button, and then click on the small arrow at the bottom right of the menu.
2.Select Restart from the list.
Windows XP
1.Click the Start button, and then click Shut Down.
2.Select the Restart option from within the Windows Shut Down dialog box.
3.Click OK to restart your notebook. Your notebook will shut down and then reboot.
Turning off your LifeBook notebook with- out exiting Windows or turning on your notebook within 10 seconds of the note- book being shut off may cause an error when you start the next time.
POWER OFF
Before turning off the power, check that the hard drive access indicator is off. (See “Hard Drive or Removable Media Drive Access Indicator” on page 14.) If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down procedure.
Be sure to close all files, exit all applica- tions, and shut down your operating sys- tem prior to turning off the power. If files are open when you turn the power off, you will lose any changes that have not been saved, and may cause disk errors.
Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
1.Windows XP: Click the Start button, then click Shut
Down. Windows Vista: Click the Start button, then click the arrow at the bottom right of the menu.
2.Select the Shut Down option from within the Windows Shut Down dialog box.
3.Click OK to shut down your notebook.
If you are going to store your notebook for a month or more see Care and Maintenance Section.
35
