Fujitsu B6220 manual Checking The Memory Capacity

U s e r I n s t a l l a b l e F e a t u r e s

Module Clip

Figure 4-12. Removing a Memory Upgrade Module

10. Replace the cover and the screws.

The memory upgrade module is not something you routinely remove from your notebook. Once it is installed, you should leave it in place unless you want to change system memory capacity.

CHECKING THE MEMORY CAPACITY

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change.

Windows XP: Check the memory capacity by clicking [Start] -> Settings -> Control Panel, then double- clicking the System icon. Select the General tab and check the amount of memory under “Computer:”

Windows Vista: Check the memory capacity by clicking [Start] -> Control Panel -> System and Maintenance -> System. The amount of memory is displayed next to “Memory - RAM:”

The amount of memory displayed should be approxi- mately the total of all memory modules installed. There may be a discrepancy which is allocated for fixed video memory.

If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. If the module is properly installed and the capacity is still not correctly recognized, see “Troubleshooting” on page 55.

47