(13)Paper jam not yet recovered.

(14)A device fault has been detected. (The fault has already been reported by the last CLEAR or READ commands.)

(15)Return operation was completed normally.

6.7Command/Response Timing Chart

These timing charts are in the normal sequence at connector pins of the scanner. In these charts, STB, PB, and SPB mean start bit, parity bit, and stop bit respectively.

Figures 6.5 to 6.10 show the timing chart for each command.

Figure 6.5 CLEAR command sequence

Figure 6.6 CONTROL command sequence

Figure 6.7 START command sequence

Figure 6.8 READ command sequence

Figure 6.9 SENSE command sequence

Figure 6.10 RETURN SENSE command sequence

50FH5037E>02

6

$ 67