6.3.5START command
When the scanner receives this command, the scanner reports the size of document being read.
Byte 1 | Byte 2 | Byte 3 |
CNT | CMD | and later |
|
|
|
X©02 | X©53 | $ |
|
|
|
6.3.6READ command
When the scanner receives this command, the scanner starts reading based on the previously set operation mode.
Issuing the response other than Read Complete during read operation causes error.
Byte 1 | Byte 2 | Byte 3 |
CNT | CMD | and later |
|
|
|
X©02 | X©54 | $ |
|
|
|
6.3.7SENSE command
When the scanner receives this command, the scanner reports the scanner status.
The Sense command can be issued at any time if another command does not require the response from the scanner.
Byte 1 | Byte 2 | Byte 3 |
CNT | CMD | and later |
|
|
|
X©02 | X©41 | $ |
|
|
|
6.3.8RETURN SENSE command
By this command, the scanner reports that the carrier unit has come back to the home position.
Byte 1 | Byte 2 | Byte 3 |
CNT | CMD | and later |
|
|
|
X©02 | X©42 | $ |
|
|
|
50FH5037E>02 | 6 | $ 45 |