Picking is specified when the scanner is required to read a special area as shown below.
Reference
A
Area to be
Document 
scanned board
B
Front side of scanner
Picking is applied when bit 5 of the control register #5 is ™1 and the address of points A and B is specified in the control registers #10 to #17.
Note:
When these registers are specified, four consecutive registers (#10 to #13 or #14 to #17) must be specified.
Ex.
CNT | CND | REG.No. | #10 | #11 | #12 | #13 |
|
|
|
|
|
|
|
(#14) (#15) (#16) (#17)
Or.
CNT | CND | REG.No. | #10 | #11 | #12 | #13 | #14 | #15 | #16 | #17 |
|
|
|
|
|
|
|
|
|
|
|
6 | $ 16 | 50FH5037E>02 |