Image control register

When the image processing option (IPC ¬) is connected, the following image processing can be executed. This register sets the image processing mode.

$Image area automatic separation function (simultaneous reading of characters and photographs)

$Inversion function (black/white conversion)

$Mirror image output function (right/left conversion)

$Image emphasis, outline extraction function

$Overlay function

$Symplified dynamic threshold

$Zooming function ranging from 25% to 400% in 1% increments.

$Function to change the reading mode of a section in the main window (subwindow function) (*3)

The method of image processing can be separately specified for the main window and subwindow.

*3: This function is executed by the subwindow control command described later.

(a)Image control register #0

LSB

7 6 5 4 3 2 1 0

0

0

0

0

0

0

0

0

 

 

 

 

 

 

 

 

X©00￿ is set when the power is turned on or the initial state is specified by the CLEAR command.

This register must be sent before setting the image control registers #1 to #8.

50FH5037E>02

6

$ 21