(d)Image control register #3
LSB
7 6 5 4 3 2 1 0
0 0
Overlay specification (*1)
0¥: No operation
1 0: Not overlay
1 1: Overlay
Overlay mode number specification (*2)
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Download/built>in overlay pattern
0:Built>in pattern valid
1:Download pattern valid
*1 When dither or Error Diffusion processing is valid by the control register #2 or operator panel, overlay is not performed even if it is valid by this register.
*2 This scanner has 6 patterns as built>in overlay pattern. (™000 to ™101) 8 patterns can be registered as down load pattern. (™000 to ™111)
The bits 4 to 7 is valid when the overlay specification is valid.
X©00 is set when the power is turned on or when the initial state is specified by the CLEAR command.
6 | $ 24 | 50FH5037E>02 |