Subwindow control register #12
LSB
7 6 5 4 3 2 1 0
00 0 
0 0 
0 (*1)
Automatic separation specification (*2)
0: Not specified
1: Specified
Black/white conversion mode specification
0: Normal
1: Reverse
*1 Subwindow control registers #12 to #14 must be sent in one sequence.
One of automatic separation, image emphasis, outline extract, overlay can be specified.
*2 When image area separation is specified, the density level for line drawing area follows the subwindow control register #10 or #17, and the dither pattern for photo area follows the subwindow control register #11, and halftone processing for photo area follows subwindow control register #16.
X©00 is set when the power is turned on or when the initial state is specified by the CLEAR command.
50FH5037E>02 | 6 | $ 39 |