6.3.2CONTROL command
This command sets the scanner to the operation mode.
Byte 1 | Byte 2 | Byte 3 | Byte 4 | |
CNT | CMD | TEXT | or later | |
|
|
|
| |
X©0x * | X©58 | Control register | Control register | |
start number. | ||||
|
|
| ||
|
|
|
|
* : x = 04 or more (relating with number of control registers)
Control register start number.
Byte 3 (control register start number.) specifies the starting control register
MSBLSB
7 6 5 4 3 2 1 0
0 0
First control register number.
Control register
The control register specifies the scanner operation mode. Byte 4 and more specifies the control registers used in this command.
Note:
Control registers #6 to #9 are not defined.
50FH5037E>02 | 6 | $ 7 |