(b)Control register #1
X©00 is set when the power is turned on or when a CLEAR command is issued for initialization
MSBLSB
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
0
Density |
|
|
|
0 0¥¥¥ | : Set from the operator panel | ||
0 1 0 0 0 | : | Light |
|
| |||
0 1 0 0 1 | : |
| Darken more |
0 1 0 1 0 | : | Somewhat light | and more |
0 1 0 1 1 | : |
|
|
0 1 1 0 0 | : | Normal | *3 |
0 1 1 0 1 | : |
|
|
0 1 1 1 0 | : | Somewhat dark |
|
0 1 1 1 1 | : | Dark |
|
1¥¥¥¥ | : | Automatic (*1) |
|
Linedrawing/photograph
0¥ : Specified from the operator panel
1 0 : Linedrawing (*2)
11 : Photograph (*2)
*1 This function is valid for image processing circuit (IPC ¬) option.
When the IPC ¬ option is installed and these bits indicate 1xxxx, the scanner applies the DTC function, and the function of the image control register and subwindow control register are not operated.
*2 The scanning speed of ADF (sheets/min) in Linedrawing mode is different from that of Photograph mode. See Appendix B for more information.
*3 When the control registor #19, bit 0 is ©0, 8 typs density are sellectable by the control registor #1, bit 3 to 0.
And when the control registor #19, bit 0 is ©1, 256 typs density are sellectable by the control registor #20.
50FH5037E>02 | 6 | $ 9 |