Mounting the antenna unit of
Referring to the outline drawing at the back of this manual, drill five holes in the mounting platform: four holes of 15 mm diameter for fixing the antenna unit and one hole of
Fastening the radiator to the radiator bracket
For your reference, the antenna installation materials list appears in the packing lists at the back of this manual (see page
1.Remove the radiator cap from the radiator bracket.
2.Coat contacting surface between the antenna radiator and the radiator bracket with silicone sealant as shown in the figure below.
ANTENNA RADIATOR
(bottom view)
Groove
Radiator
Coat grey area with silicone sealant.
(MODEL
RADIATOR BRACKET |
(top view) |
10mm |
Coat hatched area with |
silicone sealant. |
(MODEL |
Coating the antenna with silicone sealant
3.Coat threaded holes on the antenna radiator with silicone sealant.
4.Grease the
5.Lay the antenna radiator on the radiator bracket.
6.Coat the radiator fixing bolts (4 pcs.) with silicone sealant. Fasten the antenna radiator to the radiator bracket with the radiator fixing bolts, flat washers and spring washers.
Antenna radiator
Radiator bracket
Flat washer 
Spring washer 
Hex head bolt 
(M8 x 30)
Coat threaded holes with silicone sealant.
Coat bolts with silicone sealant.
