Contents of Network setup menu

Item

 

 

Description

 

Default Setting

 

 

 

 

 

 

IP ADDRESS

 

This address is assigned at the factory. Change the

 

 

 

address (last three digits; 001 to 254) when like models

Radar:

 

 

are connected directly or through the hub. Do this

 

 

 

change before connecting the equipment to the other

172.031.003.007

 

 

equipment or hub in order to distinguish equipment. Do

 

 

 

not set the same IP address in the network.

 

 

 

 

 

 

 

 

HOST NAME

 

Set the name for radar or plotter to distinguish it from

MODEL series:

 

 

others in the NavNet system. Confirm that no two

 

 

 

 

RADAR

 

 

equipment have same host names. The host name has

 

 

 

 

 

been preset depending on the series of NavNet. See

 

 

 

GD-1900C-BB:

 

 

the table below. This host name is used for RADAR

 

 

SOURCE and CHART SOURCE.

 

PLOTTER

 

 

 

 

 

 

 

RADAR SOURCE

 

Enter the host name “RADAR (preset)” or the new

 

 

 

 

name set at HOST NAME if the unit has been changed

RADAR

 

 

of the network radar to use for the radar display. Clear

 

 

the RADAR SOURCE name when your equipment is

 

 

 

GD-1900C-BB and no radar is connected.

 

 

 

 

 

 

 

 

CHART SOURCE

 

The driver names of the memory card interface unit are

 

 

 

MCDRIVE-1 (left side) and MCDRIVE-2 (right side).

MCDRIVE

 

 

Additionally, enter a host name (set at HOST NAME) of

 

 

network display unit (max. 3) which can read chart

 

 

 

 

cards.

 

 

 

 

 

 

 

 

 

 

 

SOUNDER SOURCE

 

The host name of the network sounder ETR-6/10N or

 

 

 

ETR-30N is preset (SOUNDER) for use with the video

SOUNDER

 

 

sounder display. Clear the host name when no network

 

 

 

 

 

sounder is connected.

 

 

 

 

 

 

 

 

 

AUX SOURCE

 

For the facsimile receiver FAX-30. Use the default

 

WX FAX

 

 

setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUBNET MASK

 

 

 

 

 

 

255.255.000.000

 

 

Not used. Reserved for future use.

 

 

GATEWAY ADDRESS

 

 

000.000.000.000

 

 

 

 

 

 

 

 

OFFSET PORT NUMBER

 

 

 

 

 

 

10000

 

 

 

 

 

 

 

 

NavNet equipment default settings

 

 

 

 

 

 

 

Model

 

IP ADDRESS

 

 

HOST NAME

 

 

 

 

 

MODEL1823C-BB/1833C-BB/1933C-BB/

 

172.031.003.007

 

RADAR, PLOTTER

1943C-BB/1953C-BB, GD-1900C-BB

 

 

 

 

 

 

 

 

 

 

MODEL1823C/1833C/1933C/

 

172.031.003.003

 

RADAR, PLOTTER

1943C/1953C, GD-1900C

 

 

 

 

 

 

 

 

 

 

 

MODEL1833/1933/1943

 

 

172.031.003.002

 

RADAR

 

 

 

 

 

MODEL1722C/1732C/1742C/1762C/1752C

 

172.031.003.001

 

RADAR

 

 

 

 

 

MODEL1722/1732/1742/1762

 

172.031.003.004

 

RADAR

 

 

 

 

 

 

GD-1700/1700C

 

 

172.031.014.001

 

PLOTTER

 

 

 

 

 

 

CU-200

 

 

172.031.014.100

 

MCDRIVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-3

Page 47
Image 47
Furuno 1833C-BB, GD-1900C-BB, 1953C-BB, 1943C-BB, 1933C-BB Contents of Network setup menu, NavNet equipment default settings