Furuno 1933C-BB, GD-1900C-BB, 1953C-BB, 1943C-BB, 1823C-BB, 1833C-BB manual Standard Wiring

2. WIRING

2.1Standard Wiring

All wirings are terminated at the rear of the processor unit.

Antenna unit

RSB-0094-0075 RSB-0071-057 XN10A-RSB-0070-064 XN12A-RSB-0070-059 XN12A-RSB-0072-060 XN10A-RSB-0073-064 XN12A-RSB-0073-059 XN12A-RSB-0073-060 XN13A-RSB-0072-060

				MJ-B24LPF0002-xxx
CCD				(for M1823C-BB, M1833C-BB)
				MJ-B24LPF0005-xxx
Camera
				(for M1933C-BB, M1943C-BB
		Processor Unit RPU-014		M1953C-BB)
				10/15/20/30 m
VGA
	A
MONITOR				MJ-B24LPF	Sub-display
	POWER			0010-xxx
	1	F.G.		REMOTE FMD DISPLAY
		3	0.3 A MAX
		2
	GND
3COX-2P-6C		OUTPUT			Power Supply
		12 VDC
(5/10 m)		NTSC/PAL			Unit (M1953C-BB)

RGB OUT

External

RW-8577 (5 m)

DJ-1

Buzzer

OPTION

CARD SLOT

			12-24 VDC
1 2	INPUT	NETWORK CONT DATA 3 DATA 2 DATA 1	ground
3	12-24 VDC
GND
			IV-2sq
			GPS Receiver
	(5 m)		GP-310B/320B

CAUTION

The processor unit and power supply unit are shipped with 15 A fuse.

Replace fuse with 7 A or 3 A depending on input voltage as below.

Model	Input Voltage
	12 VDC	24 VDC
M1823C-BB	7 A	3 A
M1833C-BB	7 A	3 A
M1933C-BB	15 A	7 A
M1943C-BB	15 A	7 A
M1953C-BB	3 A	3 A
GD-1900C-BB	3 A	3 A
Power supply unit	15 A	7 A

Attach appropriate label (supplied) to the fuse cover on the power cable.

Use of wrong fuse can result in damage to the equipment.

050Z-	MJ-A6SPF0012-100 (10 m)		Plotter
-A3SPF0018	MJ-A6SPF0012-050 (5 m)
	MJ-A6SPF0009-100 (10 m)		Heading Sensor
	MJ-A6SPF0007-100	(10 m)	PG-1000/500
			AD-100
	MJ-A6SPF0003-050	(5 m)
MJ	MJ-A6SPF0009-100	(10 m)
			Control Unit
			RCU-017
	MJ-A7SPF0006-050	(5 m)

	MJ-A6SPF0014-xxx				Network
12-24 VDC					Equipment
	MJ-A6SPF/TM11AP8C 050/100			Memory Card
	(5 m or 10 m)
				Interface Unit CU-200
		A
			MJ-A3SPF0026-050/100
			(5 m or 10 m)

:Standard supply

:Optional supply

:Local supply

2-1