Furuno GD-1900C-BB, 1953C-BB, 1943C-BB, 1933C-BB, 1823C-BB, 1833C-BB manual Torque 9.8 ±0.1 N .m

8.Connect the signal cable to the RTB Board (03P9249 or 03P9250), referring to the interconnection diagram and the figure below.

9.Attach three EMI cores to the signal cable as shown below.

RTB Board

J821 VH9P

J824 NH13P

Lead in	J823 VH4P
cable here.

EMI core

RFC-13

Clamp

Route cable along here.

Antenna unit chassis, cover opened

10.Fix the signal cable with the cable clamp.

11.Release the stay and close the cover. Loosely fasten the scanner bolts; you will have to make some adjustments inside after completion of wiring.

Note: When closing the cover, set the gaskets to grooves in the bottom chassis, then tighten bolts.

BOTTOM

CHASSIS

GROOVE

GASKET

SCANNER BOLT

Torque : 9.8 ±0.1 N .m

1-26