Furuno GD-1900C-BB, 1953C-BB Setting up Data Ports, DATA1, DATA2 Port menus, Nmea data sentences

3.6Setting up Data Ports

Setup the data ports according to the equipment connected to them as follows.

1.Press the [MENU] key to open the menu.

2.Press the E: SYSTEM CONFIGURATION, C: SYSTEM SETUP and A: PORT SETUP soft keys.

3.Press the A: GPS/NMEA PORT soft key for DATA 1 port, or B: NMEA PORT soft key for DATA 2 port as appropriate. One of the following displays appears depending on your selection.

FURUNO GPS SENSOR	YES
OUTPUT FORMAT	NMEA0183
	Ver 2.0
LAT/LON FORMAT	DD˚ MM.MMM'
OUTPUT DESTINATION	NO

WIRING INFORMATION TD-A >1>---WHITE TD-B >2>---BLUE RD-A>3>---YELLOW RD-B>4>---GREEN +12V>5>---RED

GND >6>---BLACK FG >7>---SHIELD

GPS/￿

PORT

A EDIT

SELECT

B SNTNC

E RETURN

			NMEA￿
FURUNO GPS SENSOR		NO	PORT
OUTPUT FORMAT		NMEA0183
		Ver 2.0	A EDIT
LAT/LON FORMAT		DD˚ MM.MMM'
OUTPUT DESTINATION		NO	SELECT
			B SNTNC
WIRING INFORMATION
TD-A >1>---WHITE			E RETURN
TD-B >2>---BLACK
RD-A>3>---YELLOW
RD-B>4>---GREEN
NC	>5>
FG	>6>---SHIELD

DATA 1 port

DATA 2 port

DATA1, DATA2 PORT menus

4.Select item and press the A: EDIT soft key.

5.Set option referring to the table on page 3-17.

6.To select NMEA data sentences to output, press the B: SELECT SNTNC soft key.

For NETWORK port, select the sentence to output to the network equipment (default: all OFF).

AAM	--
APB	ON
BOD	--
BWR	--
DPT	--
GGA	--
GLL	ON
GTD	--
MTW	--
RMA	--
RMB	ON
RMC	ON
VHW	--
VTG	ON
WPL	--
XTE	--
ZDA	ON
HDT	--
HDG	--
MWV	--
TTM	--

SELECT SNTNC

A ON/OFF

E RETURN

AAM	--
APB	ON
BOD	--
BWC	--
DBT	--
GGA	--
GLL	ON
GTD	--
MTW	--
RMA	--
RMB	ON
RMC	ON
VHW	--
VTG	ON
WPL	--
XTE	--
ZDA	ON
HDT	--
HDG	--
MWV	--
TTM	--

SELECT SNTNC

A ON/OFF

E RETURN

NMEA Version 2.0 Range and bearing mode: Rhumb line

NMEA Version 1.5

Range and bearing mode: Great circle

NMEA data sentences

3-16