Furuno 1943C-BB, GD-1900C-BB, 1953C-BB, 1933C-BB, 1823C-BB, 1833C-BB manual Connection of CU-200, Hub

2.3 Connection of CU-200

1) Connection between one processor unit and one memory card IF unit

Connect as shown in the figure below.

12 VDC

Processor unit MJ-A3SPF0026-050/100 (5/10 m)

OUTPUT

12VDC

MJ-A6SPF/TM11AP8C050/100(5/10m)

NETWORK

Memory card IF unit

12 VDC

NETWORK

two mini-cards

RJ-45

2)Connection between one memory card IF unit and multiple processor units

Prepare optional cable MJ-A6SPF0014-010/050/100/200/300 (1, 5, 10, 20 or 30 m), and procure HUB and CAT5 STP cable locally. Connect as shown in the figure below.

		MJ-A3SPF0026-050/100 (5/10 m)		Memory card IF unit
No.1	OUTPUT			12 VDC
Processor					two mini-cards
	12 VDC
unit		MJ-A6SPF0014-010/050/100/
NETWORK		200/300(cross)		NETWORK
			CAT5 STP cable		HUB
			(local supply)

(owner supply)

No.2MJ-A6SPF0014-010/

Processor 050/100/200/300 unit

MJ-A6SRMD/TM11AP8-005

No.3

Processor

unit	MJ-A6SPF0014-010/050/100/200/300
No.4	MJ-A6SPF0014-010/050/100/200/300
Processor
unit

2-6