Garmin 696, 695 Displaying Traffic Data, Enabling/disabling traffic data on the Map, 161

Hazard Avoidance

TRAFFIC WARNING WINDOW

The system displays the Traffic Warning Window when the GDL 39 issues a traffic advisory (TA). The Traffic Warning Window is a small pop-up thumbnail map in the lower left corner. The Range Rings on the pop-up alert are spaced every whole mile/ kilometer/nautical mile. Press the CLR Key to remove the Traffic Warning Window.

DISPLAYING TRAFFIC DATA

Traffic is displayed by default on the Map Page and the Traffic Warning Window.

Traffic information is also displayed on the PFD when Synthetic Vision is enabled. See the ‘Additional Features’ Section for more information.

Enabling/disabling traffic data on the Map Page:

1)From the Map Page, press the MENU Key.

2)Turn or move the FMS Joystick to highlight ‘Set Up Map’, and press the ENT Key.

3)If necessary, turn the FMS Joystick to highlight the ‘Map’ Category from the horizontal list.

4)Move the FMS Joystick to highlight the ‘Traffic Data’ field.

5)Turn the FMS Joystick to select ‘ON’ or ‘OFF’ from the menu, and press the ENT Key.

Displaying Traffic information using the map pointer:

1)With traffic displayed on the Map Page, press the FMS Joystick. The Map Pointer is activated.

2)Move the FMS Joystick to highlight the desired traffic.

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F Garmin GPSMAP 695/696 Owner’s Manual 161