Overview

SETTING AIRPORT CRITERIA

The Page Menu on the Nearest Airports Page allows the pilot to filter out airports that do not meet a defined criteria. Specific surface types and runway lengths can be defined, as well as the option to include private airports and/or heliports.

Runway Surface—allows you to set criteria for the type of surface on the runway:

Any—shows any runway, regardless of surface type, including water landing facilities.

Hard Only—shows only runways with a concrete, asphalt, or similar sealed surface.

Hard or Soft—shows all runways except water landing facilities.

Water Only—shows only water landing facilities.

Minimum Runway Length—allows the pilot to enter a specific length for the shortest runway allowed.

Entering airport criteria:

1)Press the NRST Key.

2)Turn the FMS Joystick to select the Nearest Airports Page.

3)Press the MENU Key to display the Page Menu.

4)Turn or move the FMS Joystick to select ‘Set Airport Criteria’, and then press the ENT Key. The Airport Criteria Window appears with the current settings.

Nearest Airports Page Menu

5)Move the FMS Joystick to highlight the desired field and turn the FMS Joystick to select the desired option from the menu. Press the ENT Key if necessary to highlight the next field.

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F

Garmin GPSMAP 695/696 Owner’s Manual

33

 

Page 49
Image 49
Garmin 696, 695 owner manual Setting Airport Criteria, Entering airport criteria, Nearest Airports Page Menu