Garmin 696, 695 Interface, Alarms, Changing interface settings, Changing alarm settings

Overview

Position Setup Page

INTERFACE

NOTE: Refer to Appendix D for more information on Interfacing.

Changing interface settings:

1)Press the MENU Key twice to display the Main Menu.

2)Turn or move the FMS Joystick to highlight ‘System Setup...’ and press the ENT Key.

3)Turn or move the FMS Joystick to highlight ‘Interface’ and press the ENT Key.

4)Turn the FMS Joystick to select the desired ‘Serial Data Format’.

5)Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to remove the menu.

ALARMS

The Alarms Page allows the pilot to turn airspace alarms On/Off, set an Altitude Buffer, Arrival Alarm, Next Waypoint Alarm, Proximity Alarm, and Fuel Tank Reminder Alarm.

Changing alarm settings:

1)Press the MENU Key twice to display the Main Menu.

2)Turn or move the FMS Joystick to highlight ‘System Setup...’, and press the ENT Key.

3)Turn or move the FMS Joystick to highlight ‘Alarms’ and press the ENT Key.

4)Move the FMS Joystick to highlight the desired field, and select the desired option by turning the FMS Joystick.

5)Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to remove the menu.

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F Garmin GPSMAP 695/696 Owner’s Manual 31