Appendices Additional Features Hazard Avoidance Flight Planning GPS Navigation Overview

Index

Appendix D

INFORMATION ABOUT USB DRIVERS

When connecting the GPSMAP 695/696 to a USB port, the computer prompts you to locate the destination of the drivers for the device (a USB drivers CD is included). Only install the drivers once. After the drivers are installed, your computer always detects your GPSMAP 695/696 when it is connected. USB driver updates can be found at www.garmin.com.

USING XIMAGE FOR CUSTOMIZED WAYPOINT SYMBOLS

xImage allows you to exchange images between your PC and your GPSMAP 695/696. You can download and save screen shots of any screen shown on your unit. xImage also allows you to download customized splash screens and waypoint symbols from compatible GPS units, customize them (if you have an image editing program on your PC), and send them back to your GPS unit.

You can download xImage from the Garmin Web site at www.garmin.com/ximage. Refer to the help file for complete instructions about using xImage.

CONNECTING THE GXM 40 ANTENNA (GPSMAP 696)

Connect the GXM 40 antenna to the GPSMAP 696 to access SiriusXM Satellite Weather and SiriusXM Radio. For more information about the GXM 40 antenna, see the GXM 40 Owner’s Manual.

NOTE: You must subscribe to SiriusXM Radio and/or SiriusXM WX Satellite Weather to use the SiriusXM Radio and/or SiriusXM Weather features on your GPSMAP 696.

Connecting the GXM 40 antenna:

1)Position the antenna where it has a clear view of the sky. This can be on the outside of the vehicle or behind the windscreen.

2)Plug the GXM 40 cable into the USB port on the left side of the unit, as shown in the following illustrations.

208

Garmin GPSMAP 695/696 Owner’s Manual

190-00919-00 Rev. F

 

Page 224
Image 224
Garmin 695, 696 owner manual Information about USB Drivers, Connecting the GXM 40 antenna