Garmin 695, 696 owner manual Cancelling a direct-to

Appendices Additional Features Hazard Avoidance Flight Planning GPS Navigation Overview

Index

GPS Navigation

Direct-to destinations may also be selected by using the pointer on the navigation map pages. If no airport, NAVAID, or user waypoint exists at the desired location, a temporary waypoint named 'MAP POINTER' is automatically created at the location of the map arrow.

Selecting a waypoint as a direct-to destination using the pointer:

1)From a navigation map page, press the FMS Joystick to display the pointer.

2)Move the FMS Joystick to place the pointer at the desired destination location.

3)If the pointer is placed on an existing airport, NAVAID, or user waypoint, the waypoint name is highlighted.

4)Press the Direct-toKey to display the Direct-to Window with the selected point entered as the direct-to destination.

5)Press the ENT Key.

6)With ‘Activate’ highlighted, press the ENT Key.

Cancelling a direct-to:

1)Press the Direct-toKey to display the Direct-to Window.

2)Move the FMS Joystick to highlight 'Stop Navigation' or ‘Resume Flight Plan’ if a flight plan was active.

3)Press the ENT Key. If a flight plan is still active, the GPSMAP 695/696 resumes navigating the flight plan along the closest leg.

78 Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. F