Garmin 696 Changing the CDI Scale, CDI scale = 5.0 if the previous two conditions do not exist

GPS Navigation

The course deviation scale setting is adjustable for Auto, ±0.25, 1.25 or 5.0 (nautical mile, statute mile, or kilometer) full-scale deflection. The course deviation scale appears on the lower right corner of the HSI. The default setting is Auto, which uses three factors to determine the distance from the center of the CDI to full left or right limits:

•CDI scale = 1.25 - within 30 nm of any airport in the active route.

•CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.

•CDI scale = 5.0 - if the previous two conditions do not exist.

Displaying the panel on the map page: From the Map Page press the PANEL Softkey.

Or:

1)From the Map Page press the MENU Key to display the Map Page Menu.

2)Turn or move the FMS Joystick to highlight ‘Select Page Layout’ and press the ENT Key.

3)Turn or move the FMS Joystick to highlight ‘Map with Panel’ and press the ENT Key.

CHANGING THE CDI SCALE

The CDI scale can be set from the Map Page Menu.

Changing the CDI scale:

1)From the Map Page with the Panel, HSI, or Compass Arc displayed, press the MENU Key to display the Map Page Menu

2)Turn or move the FMS Joystick to highlight ‘Set CDI Scale’, and press the ENT Key. The ‘Set CDI Scale’ Menu appears.

3)Turn or move the FMS Joystick to highlight the desired menu option, and press the ENT Key.

Map Page Menu Set CDI Scale Menu

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F Garmin GPSMAP 695/696 Owner’s Manual 41