Garmin 695, 696 owner manual DIRECT-TO Navigation, Direct-to Window

Appendices Additional Features Hazard Avoidance Flight Planning GPS Navigation Overview

Index

GPS Navigation

2.7 DIRECT-TO NAVIGATION

The Direct-to method of navigation, initiated by pressing the Direct to Key is quicker to use than a flight plan when the desire is to navigate to a single point such as a nearby airport.

Once a direct-to is activated, the GPSMAP 695/696 establishes a point-to-point course line from the present position to the selected direct-to destination. Course guidance is provided until the direct-to is replaced with a new direct-to or flight plan, or cancelled.

Entering a waypoint identifier, facility name, or city as a direct-to destination:

1)Press the Direct-toKey. The Direct-to Window is displayed (with the active flight plan waypoint as the default selection or a blank waypoint field if no flight plan is active).

2)Turn the FMS Joystick clockwise to begin entering a waypoint identifier (turning it counter-clockwise brings up the waypoint selection submenu - press the CLR Key to remove it), press the RECENT Softkey to display a list of recent waypoints, or move the FMS Joystick to select the facility name, or city field.

3)Press the ENT Key.

4)With ‘Activate’ highlighted, press the ENT Key.

Direct-to Window

76 Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. F