Garmin 696, 695 Pgrmh Fast Mode GPRMB, GPRMC, PGRMZ, and Pgrmh, Configuring TIS-A input

Appendix D

and PGRMH.

•Fast Mode: GPRMB, GPRMC, PGRMZ, and PGRMH.

TIS-A Interface Setup

Configuring TIS-A input:

1)Press the MENU Key twice to select the Main Menu.

2)Turn or move the FMS Joystick to select ‘System Setup’, and press the ENT Key.

3)Turn or move the FMS Joystick to select ‘Interface’, and press the ENT Key.

4)With the ‘Serial Data Format’ field highlighted, turn the FMS Joystick to select ‘TIS-A In’ or GTX TIS-A In/NMEA & VHF Out.

The TIS-A Status field indicates one of the following messages:

•Waiting For Data—searching for a valid TIS-A data stream.

•Data Available—receiving TIS-A data from the transponder.

•Data Unavailable—connection to transponder established, but TIS-A service is unavailable.

•Lost Connection—an error occurred or the connection to the transponder was lost.

USING AN EXTERNAL GPS ANTENNA (OPTIONAL)

The optional GA25 MCX antenna can be used. Connect the antenna to the connector located on the left side of the unit.

MCX Connector (for an optional external antenna)

GPSMAP 695/696 MCX Connector

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F Garmin GPSMAP 695/696 Owner’s Manual 215