Garmin 696, 695 owner manual Profile-Enter the descent rate, Enabling/disabling the Vnav indicator

GPS Navigation

Vertical Navigation Page

•Waypoint—Enter any waypoint along the currently active route as the reference waypoint. The reference waypoint defines the target location.

•Profile—Enter the descent rate.

•Altitude—Enter the desired reference waypoint altitude. Select ‘Above

Waypoint’ to use field elevation for airports in the Jeppesen database or ‘MSL’ to specify an exact MSL altitude target.

•By—Enter the target location with settings of distance ‘Before’ or ‘After’ a reference waypoint. To set a target location at a reference waypoint, enter a distance of zero.

•VNAV Messages—Select ‘On’ or ‘Off’ to enable/disable VNAV alert messages.

Enabling/disabling the VNAV indicator:

1)From the Map Page, press the MENU Key to display the Map Page Menu

2)Turn or move the FMS Joystick to highlight ‘Enable VNAV Indicator’ or ‘Disable VNAV Indicator’, and press the ENT Key.

Capturing/cancelling VNAV profile:

1)Enter a valid VNAV profile and begin navigation.

2)From the Map Page, press the MENU Key to display the Map Page Menu

3)Turn or move the FMS Joystick to highlight ‘Capture VNAV Profile’ or ‘Cancel Capture’, and press the ENT Key. Selecting ‘Capture VNAV Profile’ centers the VNAV indicator on the HSI (when displayed).

Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices

Index

190-00919-00 Rev. F Garmin GPSMAP 695/696 Owner’s Manual 45