Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions

About cycle options.
NOTE: Not all features are available on all dryer models. ge.com

Extend Tumble

Minimizes wrinkles by adding
approximately 60 minutes of no-heat
tumbling after clothes are dry. The beeper
will sound every 2 minutes to remind you
to remove the clothes. The ESTIMATED TIME
REMAININGdisplay will show 00.
The light around the button will light up when
EXTEND TUMBLE is on.
Extend Tumble is automatically selected
for the SteamRefresh cycle and cannot
be deselected. Dryer will beep and display
“Garments Ready” when SteamRefresh is
complete. The dryer will continue in Extend
Tumble until the door is opened.

Damp Alert

This option causes the dryer to beep when
clothes have dried to a damp level. Remove
items that you wish to hang dry. The DAMP
ALERTwill only beep when this option is
selected.
Removing clothes and hanging them when
they are damp can reduce the need to iron
some items.
The light around the button will light up when
DAMPALERT is on.

Drum Light

Press this button to turn on the light in the
dryer.
Press the button again to turn the light off.
This only controls the light when the door
is shut. NOTE: The light will turn off by itself
after one minute when the door is shut.
When the door is opened, the light comes
on automatically.
The light around the button will light up when
DRUMLIGHT is on.

Delay Start

Use to delay the start of your dryer.
1. Choose your dry cycle and any options.
2. Press DELAYSTART. You can change the
delay time in 1/2-hour increments, using
the ▲or ▼arrow pads.
3. Press the START/PAUSEbutton to start
the countdown.
The countdown time will be shown in the
ESTIMATED TIMEREMAINING display.
NOTES:
■If the door is opened while the dryer is
in DELAY, the countdown time will not
restart unless the door is closed and
START/PAUSEbutton has been pressed
again.
■You can delay the start of a dry cycle up
to 24 hours.
The light around the button will light up when
DELAYSTART is on.

Lock

You can lock the controls to prevent any
selections from being made. Or you can lock
the controls after you have started a cycle.
Children cannot accidentally start the dryer
by touching pads with this option selected.
To lock the dryer, press the LOCKbutton.
To unlock the dryer, press and hold the LOCK
button for 3 seconds.
The light around the LOCKbutton will light up
when the controls are locked.
Even though the controls are locked,
the POWER button is still active
in case you have to turn the unit off.
Press to lock control.
Hold 3 seconds to unlock.
9