GE X-9 owner manual Specifications, etc, Audio I/O, Control I/O

10 – Specifications, etc.

I/O specifications

Audio I/O

Analog inputs

LINE 1 through LINE 4	RCA pin (unbalanced)
Input level	–16 dBV
Input impedance	47 kΩ
PHONO 1 through PHONO 4	RCA pin unbalanced (with additional SIGNAL GND connector)
Input level	–54 dBV
Input impedance	47 kΩ
MIC input	XLR balanced (female)a
Input level	–55 dBV
Input impedance	2.7 kΩ
RETURN (L, R)	1/4” jack (unbalanced)
Input level	–10 dBV
Input impedance	22 kΩ
Analog outputs
MASTER OUTPUT (BALANCED)	XLR balanced (male)a
Output level	+ 4dBu
Output impedance	75 Ω
MASTER OUTPUT (UNALANCED)	RCA pin (unbalanced)
Output level	–10 dBV
Output impedance	1 kΩ
BOOTH OUTPUT	RCA pin (unbalanced)
Output level	–10 dBV
Output impedance	1 kΩ
SEND (L, R)	1/4” jack (unbalanced)
Output level	–10 dBV
Output impedance	1 kΩ
PHONES (x 2)	Stereo 1/4” jack
Maximum total output level	30 mW + 30 mW
Total load impedance	32 Ω
Digital inputs
CH 1, CH 2	RCA pin, IEC60958 TYPE I or TYPE II (auto-detect)
Digital output
DIGITAL OUT	RCA pin, IEC60958 TYPE II (SPDIF)

a. All XLR connectors are wired 1=ground, 2-live (hot), 3=return (cold)

Control I/O

FADER STOP/START 1 through 4 3.5 mm mini-jack (high=5 V, Low (on)=0 V) Tip=PLAY, GND=READY

FOOT SW 1, FOOT SW 2 1/4” jack (for use with RC-30P)

30 TASCAM X-9Owner’s Manual